Send Message
Home ProductsDecoiler And Straightener

Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping

Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping

  • Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping
  • Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping
  • Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping
  • Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping
Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping
Product Details:
Place of Origin: Guangdong, China (Mainland)
Brand Name: RUIHUI
Certification: CE, ISO certification
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Packaging Details: Wooden Box or Vacuum Packing
Delivery Time: 30 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 30 Sets Per Month
Contact Now
Detailed Product Description
Place Of Origin: Guangdong, China (Mainland) Brand Name: RUIHUI
Condition: New Product Name: NC Servo Straightener Feeder
Stock Width: 50~300mm Stock Thickness: 0.3~4.5
Line Speed(M/Min): 16~24 Color: Customized
Size: 2100*3300*2260 Weight: 9T
Power: 12KW Function: Feeding The Material Into The Press After Straighting The Material
After-sales Service Provided: Engineers Available To Service Machinery Overseas
High Light:

stamping press feeder

,

coil processing equipment

Heavy-Duty Material Frame, Aluminum Die Stamping, Dongguan Punching Automation Equipment, Pendulum feeder
www.ruihui.net

As the automatic production line for stamping, the heavy-duty material frame is the most used material for discharging and unwinding. It has two kinds of power and power. Although the material-free frame requires less material.

However, because the unpowered material frame needs to be pulled by the subsequent leveling machine head, the motor of the leveling machine is greatly depleted, so it is rarely used in the market, and most of them still use the power heavy material frame.

In the stamping automatic production line, the feeder is stepped according to the requirements of the stamping process. Therefore, when the heavy material rack is unrolled, it needs to cooperate with the subsequent leveling machine and the feeder to stop and operate, and the standard heavy material frame is controlled to start and stop. It is controlled by a sensor rod mounted on the side of the fuselage.

The automatic control principle of the standard heavy-duty material frame is: the induction rod is equipped with 24V DC voltage and is insulated from the machine table. When the material is unrolled through the material frame, the material will sag to a certain arc when input to the subsequent machine. When the arc is too large, the arc is exposed. When sensing the rack.

The 24V induction circuit is turned on, and the machine is stopped by the intermediate relay and the time relay. When the subsequent machine continues to use the material belt to release the material belt from the induction frame, the material frame will continue to discharge.

This achieves a fully automated control material frame opening and closing, but this type of control must require that the surface of the unwound material be electrically conductive.

1. Use the on-beam photoelectric sensor switch to control the automatic opening and closing of the material frame. The on-beam photoelectric switch is installed at a height position where the material frame needs to be opened and stopped. When the material unwinding material hangs down to a certain position to block the incident light, the photoelectric switch controls the stop of the material frame, and when the subsequent machine is used, When the material is out of the position of the opposing light, the discharge can continue to be initiated.

2. Use the micro switch to control the automatic opening and closing of the material frame. The micro switch is fixed by the floor stand and placed in the material rack and the waiting area of the subsequent leveling machine and the feeder. When the unwinding tape droops and touches the micro switch, the micro switch gives the material rack. The intermediate relay inside sends a control signal to control the material frame motor to stop running.

leveling machine

Specification:
 

Model MAC2-400 MAC2-500 MAC2-600 MAC2-800
Stock Width(mm) 50-400 50-500 50-600 50-800
Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2
Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000
Max.Coil O.D.(mm) 1200 1200 1200  
Coil I.D.(mm) 8 8 508 508
Feed Length(mm) ~500* ~500* ~500* ~500*
Max. Line Speed(m/min) 16-24 16-24 16-24 16-24
Work Roll Number(pieces) upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
Feed Roll Number(set) 1 1 1 1
Main Motor(kw) AC2.9 AC2.9 AC4.4 AC4.4
Mandrel Expansion hydraulic hydraulic hydraulic hydraulic
Reel Motor(kw) 1.5 1.5 1.5 2.2 2.2 3.7
Power(V) 3 Phase 220V/380V/50HZ
Operating Air(Mpa) 0.49 0.49 0.49 0.49


Straigtening performance:
 

tock Thicknees (mm) Stock Width (mm)
0.3 400 500 600 800
0.4
0.6
0.8
1.0
1.2
1.4
1.6 470 470
1.8 400 400
2.0 360 360
2.3 300 300 300 300
2.5 230 230 230 230
2.8 150 150 150 150
3.2 110 110 110 110


*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping 1
Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping 2

1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.

Contact Details
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.

Contact Person: Calin Deng

Tel: 13826917409

Fax: 86-769-89296723

Send your inquiry directly to us
Best Products
Other Products