Send Message
Home ProductsHigh Speed Feeder

Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line

Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line

  • Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line
  • Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line
  • Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line
  • Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line
  • Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line
  • Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line
Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line
Product Details:
Place of Origin: Guangdong, China (Mainland)
Brand Name: RUIHUI
Certification: CE, ISO certification
Model Number: MAC
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Packaging Details: Wooden Box or Vacuum Packing
Delivery Time: 30 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 30 Sets Per Month
Contact Now
Detailed Product Description
Stock Width(mm): 50~600 Stock Thickness(mm): 0.3~3.2
Line Speed(m/min): 16~24 Coil Weight(Kg): 3000/5000
Work Roll Number(Pcs): Upper 6/lower 5 Main Motor(Kw): AC 4.5
Warranty Period: 12 Months
High Light:

mechanical roll feeder

,

roll feeder machine

Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line
 


1. Start the leveling machine or material frame on the stamping production line and let it slowly feed the NC feeder.

2. Adjust the position of the two stopper wheels on the NC feeder according to the width of the coil, so that the width of the stopper wheel matches the width of the coil, taking care not to hinder the operation of the coil.

3. Lift the loose handle of the NC feeder, place the coil between the upper and lower rollers, press the release handle, loosen the fastening screw of the material thickness adjustment handle, and adjust the handle up and down to ensure that the relaxation bracket has a swing clearance of about 5 mm. Then tighten the fastening screws of the handle.

4. Press the inch button and the material is introduced into the mold.

5. adjust the pressure spring (the working principle of the pressure spring is to apply pressure to the upper roller, so that the upper roller can press the material, and the coil is sent out) pressure, so that the coil will not slip when passing through the NC, if the coil material When the thickness becomes larger, the pressure should be increased.

6. Enter the feeding length on the operation panel of the NC feeder, and then set the corresponding feeding speed according to the actual production demand of the stamping to ensure that it is synchronized with the punching machine.

7. When the leading pin tip of the punching die enters the guide pin hole, adjust the loose screw to the bearing that touches the loose bracket until the coil is loosened and the screw nut is locked.

8. Adjust the start feeding signal of the NC feeder by adjusting the rotating cam of the punching machine (starting the feeding signal, which is the angle at which the punching crankshaft starts feeding). The recommended angle is 9:00 to 3:00 (240-90).

 

9. After the setting is completed, the single-action punching machine will observe the discharge length and appearance with one stroke feeding, and adjust to the required standard.

10. After confirming the above work, press the automatic button press line to continuously produce.

MAC feeder

Specification:
 

Model MAC2-400 MAC2-500 MAC2-600 MAC2-800
Stock Width(mm) 50-400 50-500 50-600 50-800
Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2
Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000
Max.Coil O.D.(mm) 1200 1200 1200  
Coil I.D.(mm) 8 8 508 508
Feed Length(mm) ~500* ~500* ~500* ~500*
Max. Line Speed(m/min) 16-24 16-24 16-24 16-24
Work Roll Number(pieces) upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
Feed Roll Number(set) 1 1 1 1
Main Motor(kw) AC2.9 AC2.9 AC4.4 AC4.4
Mandrel Expansion hydraulic hydraulic hydraulic hydraulic
Reel Motor(kw) 1.5 1.5 1.5 2.2 2.2 3.7
Power(V) 3 Phase 220V/380V/50HZ
Operating Air(Mpa) 0.49 0.49 0.49 0.49


Straigtening performance:
 

tock Thicknees (mm) Stock Width (mm)
0.3 400 500 600 800
0.4
0.6
0.8
1.0
1.2
1.4
1.6 470 470
1.8 400 400
2.0 360 360
2.3 300 300 300 300
2.5 230 230 230 230
2.8 150 150 150 150
3.2 110 110 110 110


*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line 1
Automatic NC Feeder Machine Pneumatic Mandrel Expansion Uncoiler Leveler Feeder Line 2

1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.

Contact Details
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.

Contact Person: Calin Deng

Tel: 13826917409

Fax: 86-769-89296723

Send your inquiry directly to us
Other Products