Place of Origin: | Guangdong, China (Mainland) |
Brand Name: | RUIHUI |
Certification: | CE, ISO certification |
Model Number: | MAC4-600H |
Minimum Order Quantity: | 1 Set |
---|---|
Price: | Negotiable |
Packaging Details: | Wooden Box or Vacuum Packing |
Delivery Time: | 30 work days |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 30 Sets Per Month |
Condition: | New | Type: | Straightener Feeder & Uncoiler |
---|---|---|---|
Use: | Sheet | Voltage: | 380V/Customized |
Power(W): | 15KW | Dimension(L*W*H): | 3630*2650*2460 |
Weight: | 7T | Certification: | CE ISO |
Warranty: | 1 Year | Material Width: | 70~600mm |
Product Name: | NC Servo Straightener Feeder | Coil Weight: | 5000kg |
Material Thickness: | 0.6~6.0mm | Color: | Customized |
High Light: | coil feeding equipment,sheet metal coil feeder |
Fully Automatic 3 In 1 Roller Feeder Straightening Machine MAC4-600H Punching Processing
Roller feeder selection points:
1. The brand, model and tonnage of the punch.
2. the direction of the output shaft of the punch (positive punch stand, the output shaft is in the left hand direction, the left side. The output shaft is in the right hand direction, the right side. The output shaft lies in the face-to-face, directly in front).
If it is a traditional mechanical punch, if there are flywheels on both sides, the length of the output shaft to the brake disc should exceed 50mm. If you can't judge, please take a few photos of the actual punch, let us help you decide.
3. Material width.
4. Material thickness and material.
5. Feeding step (each feeding length) and accuracy requirements.
6. The number of feeds per minute (maximum speed) is related to each feed step.
7. The height of the mold line and the mold have no guiding pin. Punch work surface and lower mold height.
8. The width and thickness of the punch table (the side of the punch).
9. Punch output shaft diameter and length. (Install the backrest wheel).
10. The height of the punching machine work surface in the center of the punch output shaft. (Calculate the length of the link).
Roller feeder special accessories:
1. Sending distance fine adjustment device (for RF-1310 or 65T punching machine): The structure is the same as the eccentric disk of the roller feeder, installed at the rocker arm, instead of the rocker arm connected to the drive shaft, used to adjust the feeding step in a small range ( Save time within 0.1mm).
2, the installation of PU wheel (German imported material): for sensitive soft materials, the stamping process will not cause any indentation or scratch on the surface of the material.
3. Pneumatic relaxation: The standard type of relaxation of the roller feeder is mechanical rod-type relaxation. If the punch structure is not suitable for mechanical mode, the cylinder and solenoid valve can be added to achieve pneumatic relaxation.
2.Specification
Specification | |||||
Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 |
Stock Width(mm) | 70~400 | 70~600 | 70~800 | 70~1000 | 70~1300 |
Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 | 7000 |
Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 | 1400 |
Coil I.D.(mm) | 508 | 508 | 508 | 508 | 508 |
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ~500* |
Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 | 16~24 |
Work Roll Number(piece) | upper 4 | upper 4 | upper 4 | upper 4 | upper 4 |
down 3 | down 3 | down 3 | down 3 | down 3 | |
Feed Roll number(set) | 1 | 1 | 1 | 1 | 1 |
Main Motor | AC5.5 | AC7.5 | AC7.5 | AC11.0 | AC11.0 |
Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 3.7 | 3.7 |
Power(v) | 3 Phase 220V/380V/50HZ | ||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance | ||||||
Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 | |
Stock Thickness (mm) | 0.6~1.3 | 400 | 600 | 800 | 1000 | 1300 |
2.0 | ||||||
2.3 | ||||||
2.5 | 1170 | |||||
2.8 | 933 | 933 | ||||
3.2 | 714 | 714 | 714 | |||
4.0 | 457 | 457 | 457 | 457 | ||
4.5 | 361 | 361 | 361 | 361 | 361 | |
5.0 | 293 | 293 | 293 | 293 | 293 | |
6.0 | 203 | 203 | 203 | 203 | 203 |
FAQ:
Q1:What kinds of machines do you have?
Service:
1. Pre-Sales Service:We have professional designers to meet the different requirement.
Contact Person: Calin Deng
Tel: 13826917409
Fax: 86-769-89296723
Phase Style Automatic Nc Servo Sheet Metal Coil Feeder Stam
High Speed Nc Servo Roll Feeder For Matel Coil Machine Pneumatic release RNC-800HA
Punching Steel Straightening Nc Servo Feeder Machine / Nc Roll Feeder
OEM CCS Nc Servo Roll Feeder and Uncoiler Straightener RNC-400F
Auto High Speed Steel Coil Feeder Machine For Continuous Multiple Project Processing
Latest High Speed Mechanical Roll Feeder / Punch Press Feeder
Precision Coil Decoiler Straightener Feeder For Metal Stamping / Stainless Steel
Uncoiler And Decoiler Straightener Press Feeding Equipment For Sheet Metal
Coil Sheet Automatic Decoiler Straightener Feeder For Press Line(MAC4-800F)